How Care For Alocasia Zebrina (Zebra Plant)

Alocasia Zebrina is an attractive evergreen plant that is an excellent option for your home.

With its large emerald-green arrowheads and a zebra-striped stem it is among the most distinctive Alocasia species.

The stunning plants look fantastic indoors and don’t require excessive attention. However, this doesn’t mean they shouldn’t be regarded as a nuisance They require certain conditions for optimal growth. To ensure that your plant grows healthy and tall, here is an easy step-by-step Alocasia Zebrina care guide.

Common Names For Alocasia Zebrina

The unique look of the Alocasia Zebrina is what has given it a variety of appealing names. Many of the names given to this plant relate to its unique stalks.

The houseplant has the dark green stems of animal prints, which are that are covered in light cream or green. It’s what give this popular plant its leopard or zebra-like appearance.

Because of its distinctive exotic look The plant is frequently called Alocasia Zebrina Tiger, Alocasia Zebra or Alocasia Leopard.

Other names that are commonly used are Alocasia Reticulata Zebrina as well as Alocasia Elephant Ear, a name that is applied to a variety of Alocasia species.

Alocasia Zebrina

Alocasia Zebrina Care Tips

Alocasia plants are fairly low maintenance if you adhere to their fundamental requirements.

To ensure that your Alocasia Zebrina grows green and tall Here are some essential guidelines for caring for a tiger plant.

How Much Light Does Your Alocasia Zebrina Need?

Similar to the other plants with elephant ears, Alocasia Zebrina needs lots of sun. The large leaves act to act as solar panels, and they are happy taking in plenty of indirect light. Direct sunlight however is often too harsh and can cause burning to the leaves of your Alocasia.

To maximize growth, a the southern exposure, secured by a sheer curtain is the best. Alternately, you can place the plant just a few feet of the windows. Another option is to give them the sun’s rays for one hour every day in morning hours. the morning.

Note Alocasia leaves are known to expand rapidly towards the light source. This could result in the plant becoming unbalanced. To ensure that your plant is upright, turn the pot 90 degrees each time you water it.

How To Care For Alocasia Zebrina In Winter?

In the winter, Alocasia Zebrina enters its dormancy stage. When the plant is dormant, it ceases to grow and leaves begin to diminish and eventually fade away. This is normal therefore do not be concerned.

In order to ensure that your Alocasia is able to the spring season, it’s recommended to cut down on the amount of water you are putting in. Let the top 2 inches of the soil to dry prior to watering again.

Also, put your plant in a sunny location. When spring comes around the plant will start to grow.

Signs Your Alocasia Zebrina Needs More Light?

There are many issues that could arise that could indicate that the Alocasia Zebra plant needs more lighting. This includes:

  • Stem starts to shrink as the plant begins leaning toward the source of light
  • Poor coloration
  • Brown or yellow spots on leaves
  • There is no new growth, especially in winter.
  • Soggy soil

If you suspect that your Alocasia Zebrina is showing any of these signs, think about shifting them to a brighter area.

Alocasia Zebrina Temperature Requirements

Alocasia Zebrina grows best in warmer, comfortable areas. They don’t like the cold. Even a small chill could cause the loss of leaves. In addition the prolonged cold could cause plants to become dormant.

For keeping the Alocasia Zebrina happy, it is recommended to keep temperatures that are between 18oC (65oF) and 28 (82oF). Beware of sudden temperature fluctuations and ensure that your plant is free of air conditioners, heaters or any other drafts. This causes drying of the air, which lowers the humidity levels around your plant.

Alocasia Zebrina Humidity Requirements

The plants of Alocasia Zebrina are rainforest dwellers They naturally favor humid conditions. The ideal humidity level for Alocasia Zebrina is 60% or more. If the air is too dry, the plants are more susceptible to insects and their gorgeous green leaves could turn become brown.

To ensure that your Alocasia gets the water it requires to thrive, it should be kept inside a greenhouse, or inside with humidifier. It is also possible to mist your Alocasia every each week in the morning by spraying it with water that is room temperature. This can also stop dust from getting on the leaves.

Another method that works is to put your Alocasia Zebrina on the pebble tray. When the water below begins to evaporate, it can increase the humidity around the plant.

How Often Should You Water Alocasia Zebrina?

Although Alocasia Zebrina loves humid climates however, it is not a fan of being soaked with water frequently. It is preferential to lightly submerge this plant rather than drown it. If the plant is overwatered, it is more prone to root decay. Because their thick stripes store lots of water they do not require a lot of water throughout the year.

In the summer and spring It is recommended to only do this when the top 12 inch of soil feels dry. It is always recommended to stay clear of soaking the soil. It is best to only water the soil in small amounts as required. In the winter months, it is suggested to leave the two inches that are the top of the dirt to dry out between irrigations.

Alocasia Zebrina Soil And Fertilizer

As mentioned previously it is best to submerge the plant a little rather than overwater it. To decrease the chance of the plant becoming overwatered, it’s recommended to use soil that is able to drain effectively. So the soil will be able to absorb the right amount of water, and the plant will not suffer from developing root decay.

The Alocasias feed heavily, especially in the spring and summer. In this period, it is recommended to feed your plant by a 1/2-dilution of a balanced formulation each two weeks.

You can also make use of an organic, slowly-releasing fertilizer that will need feeding your baby plant every 4 to 6 weeks. When winter comes around the plant goes into dormancy and it is recommended to not feed it until the start of the next spring.

When And How To Trim Your Alocasia Zebrina

The reasons for trimming elephant ear plants are to stop the spread of fungal infections or disease, and also fixing any damage caused by cold. The most common signs of damage from cold include yellowed leaves as well as the appearance of a droopy or mushy plant.

If the Alocasia Zebrina show any signs of injury, infection or other diseases, you should follow these simple steps:

  1. Take a sterilized knife or pruning tool, and also an assortment of gloves that are protective. This is crucial because Alocasia Zebrina is toxic and may result in skin irritations.
  2. Examine your Alocasia for any damaged stems and leaves.
  3. Trim foliage back in proximity to main stem.
  4. Remove any imperfections by following the natural form that the leaves have.

To speed up recuperation, the most effective time to trim the Alocasia Zebrina is at the time of the beginning of the growing season.

Repotting Alocasia Zebrina

Alocasia Zebrina is a fan of being roots bound in smaller pots. Therefore, don’t make a hasty decision when you decide to relocate it into the larger pot.

Furthermore, if you have to transfer the pot to a larger one make it so in smaller amounts.

For you to repot your Alocasia Follow these steps:

  1. Remove the plant carefully from the pot in which it is currently growing and check root for signs of wraps. If that is the case you can gently break them by slicing them with your fingers or cutting the roots with a sterilized knife.
  2. Start replacing the soil with the same type of composite to ensure that the plant is not shocked.
  3. Install the Alocasia Zebrina in its new place of residence.
  4. The remaining pot with soil mix, and then firm it up in the vicinity of the plant.
  5. Make sure to water well, but make sure to keep track of the soil’s moisture. This is crucial since the larger pot can increase the volume of water relative with the roots system.
  6. The Alocasia again in the same place it was growing prior to. Make sure the area has adequate lighting.

Propagating Alocasia Zebrina

The most effective method to propagate the Alocasia plant is to use the offset division technique. Because these plants are tuberculous and grow from an the central rhizome.

This is why they aren’t usually suited to propagate by cutting.

It doesn’t mean that the propagation of your Alocasia requires a lot of effort. Actually, it’s relatively simple if you follow these steps:

  1. Remove the plant gently from its pot, and then remove the soil that is left behind from the roots. If the soil is getting clumped up, you can use a garden hose to loosen the roots up.
  2. After the roots are exposed, you’ll notice numerous clumps and offsets (baby plants).
  3. Remove the offsets gently using the knife or scissors sterilized or pruning tools.
  4. Put the plants in their own individual pots. Plastic nursery pots are suggested to encourage soil growth.
  5. Set the offsets in a place in a location that will get sufficient light. Also, make sure the soil is moist enough. It’s important to be patient as these plants could suffer a shock to the transfer, so the new growth could take a few weeks to appear.
  6. Plant the plant in its parent, and make sure to water it thoroughly.

Alocasia Zebrina Common Problems

If you follow the tips for care provided so far Your Alocasia Zebrina will be healthy and happy.

However, there are several issues that could affect even the most healthy of Alocasias. The causes will be discussed in the following.

How To Take Care Of A Alocasia Zebrina: Diseases And Pests

When you’re Alocasia Zebrina is well cared for, it’s not at risk of being a victim of diseases or insects.

Although your plant may be healthy, that doesn’t mean that it is completely immune. Droughts and overwatering can leave your plant susceptible.

Here are some common elephant ear problems that your Alocasia might experience and how to treat the problem.

Root Rot

One of the most frequent elephant ear plant ailments is root rot. It’s typically caused by excessive watering.

Root rot can be caused by the absence of sunlight, excessive watering and drainage holes that are not adequate. If you have your Alocasia Zebrina experience root rot the root can be treated by following these steps:

  1. Take the plant out of its soil and clean its roots.
  2. Make use of a sterilized knife or pruning instrument to cut off the affected areas from the root.
  3. Clean the plant with 5-10% bleach solution. To get rid of any fungi, soak the healthy roots in a fungicide.
  4. Repot your Alocasia Zebrina. Make sure you dispose of the soil that is infected and ensure whether the new soil has been well aerated and drains properly.

To prevent stressing root systems of Alocasia plant, do not feed till the Alocasia has completely recovered. Another way to avoid overwatering is to water only when the soil surface starts to feel dry.

Leaf Spot Disease

Leaf spot disease may be the result of high humidity and temperatures as well as poor air circulation, excessive watering, and untreated root decay.

The spots are easy to spot by the color of the spots. Orange, brown or yellow spots begin to appear on the plant’s leaves. The spots are usually followed by dark circular bands around the lesions.

To treat Leaf spot diseases, you must follow these simple steps:

  1. Take away the leaves that are severely damaged and the fallen debris that has accumulated over the surface of the earth.
  2. Clean the plant gently using water prior to applying a Fungicide. It is suggested that you apply a product that has chlorothalonil to safeguard the plant from further attacks.
  3. Get rid of any other debris and also the most affected areas to ease symptoms. Transfer the Alocasia to a separate area from other plants in order to avoid an outbreak in the future.
  4. Clean the plant frequently and get rid of dust particles to ensure that air can flow through the leaves with ease.

Alocasia Zebrina Insect Invasions

The most frequent critter in these plants is mealy bugs. Although they are the most frequent, Alocasia Zebrina are also susceptible to spider mites, scale and aphids.

It is essential to look regularly beneath the leaves and along the stem of your Alocasia to look for any unusual activities.

If you spot an infestation Do not be concerned. You can get rid of your plant of any infestation with these simple steps:

  1. You must isolate the Alocasia Zebrina from other plants to avoid future outbreaks.
  2. Apply the insecticidal soap or a light horticultural oil. Make sure you protect the plant with a good layer of.
  3. Clean the leaves with a clean , dry cloth.
  4. Repeat the procedure every 5-10 days until the issue is solved.

Alocasia Zebrina Dropping Leaves

If Alocasia Zebrina is growing, it will grow many leaves in the course of. When the plant is covered with many more leaves that it can handle (usually over five) It will then start to shed the weaker ones.

This is due to the fact that the plant cut off the nutrients that are supplied to the leaves in order to ensure that they are preserved for future growth.

It is natural for Alocasia Zebrina plants. In fact, it’s an indication that new leaves are in the process of being planted.

Alocasia Zebrina Leaves Turning Yellow

As we have previously mentioned, Alocasia Zebrina can only contain approximately 5 leaves per plant.

If it is over this amount and it is unable to supply the nutrients that are supplying weaker leaves. In this case the leaves that are weaker tend to become yellow and then fall off. It is an expected occurrence and is used to encourage the growth of new leaves.

There are other causes of yellowing leaves which could indicate that the Alocasia Zebrina is not receiving the proper treatment. This is most often the over or underwatering.

To fix this, you must check the watering schedule of your plant and make sure it’s getting enough lighting.

Alocasia Zebrina Brown Spots

The most frequent reasons for brown spots is fungal diseases and pest infestations. It usually happens as the result of excessive watering or low humidity. It can also cause temperatures that make the plant more susceptible.

Other causes include sunlight exposure or burn from fertilizer.

Brown spots appear on the underside and top of the leaves. If you see brown spots appearing it is recommended to take action as quickly as you can.

To do this, take the affected leaves off using an unsterilized blade or pruning tool.

After that you can apply a fungicide to avoid additional stress. Then, make sure the plant is properly taken care of according to the guidelines in the article.

Alocasia Zebrina Frequently Asked Questions

If you’ve learned how to take care of your Zebra plant, you’re all prepared. For more details, here are a few frequently asked questions and their solutions.

Why Is My Alocasia Zebrina Drooping?

The reasons for the reason for your Alocasia Zebrina drooping include lack of light and submerged.

If your plant isn’t receiving enough indirect, bright sunlight, it will tilt toward the source of light. Make sure that the plant’s requirements for light are satisfied.

Additionally, The stems on your Alocasia plant will begin to droop if the plant isn’t filled with water. If you observe that all the stems are drooping, the plant might require watering.

If only one stem begins to lose its shape The plant could attempt to replace the damaged stem with a fresh leaf. In this instance, you should be careful not to overwater.

Why Are My Alocasia Zebrina Leaves Turning Yellow?

The yellowing leaves indicate the possibility that you Alocasia Zebrina is getting excessive or insufficient water.

Although soil that is slightly moist is essential for plant development, it is vital to ensure that it’s not overly wet or dry.

To prevent this from happening, make sure that the soil of your plant drains properly and only water when the soil feels dry. Make sure that the Alocasia’s lighting and humidity requirements are met.

Why Are My Alocasia Zebrina Leaves Curling?

There are many reasons that your Alocasia’s leaves are curled. This could be due to the absence of sunlight, excessive watering and low levels of humidity.

Make sure you provide your plants with the attention it requires.

Is Alocasia Zebrina Poisonous?

Alocasia plants contain calcium oxalate crystals. The result is that the plants are poisonous to horses, humans as well as cats and dogs and could be fatal if consumed.

Chewing or gnawing on these plants could cause massive swelling of the upper airway, which makes it difficult to breathe. If you handle these plants in a non-safe manner, gloves could cause irritations to the skin.

Make sure that your Alocasia Zebrina plant is away from your pet and your children. If an animal or a person would like to eat the plant, consult the veterinarian or doctor immediately.

Is Alocasia Easy To Care For?

As with many indoor plants, Alocasias are fairly low maintenance if their requirements are met.

They can be quite sensitive to the light, temperature, humidity soil, water, and light needs.

If you adhere to the basic guidelines laid out in this article Your Alocasia will be sure to prosper for many the years to be.

Alocasia Zebrina Browning Edge

The browning edges usually occur caused by insufficient humidity or a lack of moisture. A proper watering schedule is essential to ensure that your plant is healthy.

Make sure that Alocasia Zebrina is watered regularly throughout the growth season.

Maintain the soil moist, however, be careful not to overwater. Let the area of soil to become dry after the watering.

To increase the humidity naturally you can mist your Alocasia every day or put it on a tray of pebbles.

When Is The Dormant Period Of The Alocasia Zebrina?

The dormant phase of Alocasia Zebrina typically starts in the fall and continues throughout winter. In this period the active growth ceases and resumes at the start of spring.

Should You Mist Your Alocasia Zebrina?

Similar to the other plants with elephant ears, Alocasia Zebrina loves warm, humid environments. If the area the plant is located in isn’t humid enough (above 60 percent) Misting is recommended.

Make sure to do this at least twice every day. If you already have other measures in place, like Pebble tray, or humidifier Misting might not be necessary.

Is Alocasia Zebrina a Good Houseplant?

With its huge leaves and black zebra-like printed leaves, Alocasia Zebrina is truly stunning. Its striking design it will brighten the corners of any room in your home.

Make sure that no matter where you put it, the location is adequately lit and humid.

Zebrina Alocasia Care – Final Thoughts

With its black and yellow stripes on the stems The Alocasia Zebrina is truly a special species that makes a wonderful feature to add to your garden.

As with many indoor plants, it’s relatively low maintenance if it is taken care of properly.

If you follow the tips outlined in the article, and giving some love by giving it a little TLC, your Alocasia will surely flourish.

Are you interested in adding an additional ears of an elephant to the collection? Take a look at the exotic green emerald Alocasia Baginda.

Stephanie

Stephanie

Went from a bad gardener to a half-decent one over 10+ years. Super happy to share my tips and tricks with you :)