How Often to Water Snake Plant (In-Depth Guide)

The process of watering the Snake Plant is probably the most important thing to learn in order to maintain the plant in good condition.

I’m sure of this, as I learned this lesson the hard way. With such a difficult plant it’s easy to think that you are able to use the’seat you’re at’ approach in watering.

The correct way to water a snake plant isn’t difficult when you adhere to some simple guidelines that we’ll discuss in greater detail during the span of this post.

The snake plant should be watered when the soil is dry to ensure the plant’s best appearance. A few times every week is the most effective method of determining if your plant requires watering. The time to water is when the top 2 inches of soil feel dry.


Beware of excessive watering during winter. The excess watering can result in damage to the leaves. They may start to yellow and then rot at the base.

How Often to Water Snake Plant

You might be shocked to learn that improper watering is among the primary causes of the disease that affects the snake plant.

It is crucial to know how often you water for the snake plant. Here are some of the wrong watering situations:

In this moment, you’ll be able to identify the watering issue. The next step is to determine the best time to water. Let’s discuss that.

When to Water Snake Plant

In a perfect world, there would be a single guideline for when and how you should take care of the Snake Plant and life would be simple and sweet.

Ah, if it were that way. There are many various factors that determine if your plant is healthy not require kept hydrated. We’ll examine them today.

Do not let it put your off. In the future, I’ll give you a few easy tests that can tell you definitively whether or not you should water.

The most efficient method to know the time to give your plant a watering is by examine the soil in the potting area. It is as easy as digging your fingers into the soil for up to 2 knuckles.

If you don’t want allow your finger to become dirty then you can use pencils or any other kind of stick. If the soil is dry less than two inches above the top layer, then it’s time to give your snake plant a good watering.

Snake plants are able to go without water for over one month, but you should not overwater them at the same period of. This can cause rotting of the roots, and your snake plant could end up dyingas as a consequence.

Let’s first examine the major elements that determine the time when the Snake Plant requires water.

You May Also Enjoy: What Causes Brown Spots on Snake Plant? (And How to Fix It)

Factors That Impact Watering Snake Plant Frequency

It is important to take into consideration some environmental factors. This will allow you to determine the appropriate frequency of water to use for the snake plant.

Seasons

It might seem odd to think that a plant living in a house responds to seasons and weather however, it is the situation.

In spring, your plant will begin to wake up from its dormant phase and will begin to grow.

At this point it will require more water than it would throughout the year The gardener must react in a manner that is appropriate.

In the summer the plant will begin to reduce the sudden surge of energy, but will require a constant flow of water.

The pace of growth will slow more as autumn approaches and, when it comes to winter there will be no growth, and watering is almost non-existent.

The plants are cultivated to produce a sword-like leaf However, they can also bloom.

In spring, they sometimes send up an extended stem that produces sweet, creamy-scented flowers that will be at the top.

After the blooming has finished when the flowering has finished, remove the stem at the base using a pair of secateurs.

The process of making a flower takes energy and effort from your plant, and it is possible that you will require more frequent watering during this time.

Temperature

This is a bit of an uniggy. The ideal situation is that the Snake Plant will be happiest within the 55deg-85deg F (13 30degC – 13) range.

It’s quite a wide range of tolerance, and it shows just how durable these plants are.

They’ll begin to get uneasy if you allow temperatures to fall below 50 deg F (10degC).

What you’ll notice is that, at higher temperatures the plant will need frequent watering. This is due to a mix of elements.

  • First the leaves will begin release more moisture into the air.
  • The soil will dry faster because of the increased transpiration.

Humidity Levels

Temperature and humidity often are inextricably linked. If the air around the Snake Plant becomes too dry it will start to be affected.

However they are desert plants and are vulnerable to diseases like mold if the environment is too humid. This shouldn’t be an issue in normal conditions due to the fact that the plant is extremely robust.

The most likely place to be a issue is when you use central air conditioners or heating systems. Both of them can dry out the air and increase the humidity issue.

When your plants are being properly watered and properly, it is in a better position to handle the situation should the humidity levels do not meet the levels it would need.

If you put the Snake Plant among a group of other plants, they will create their own microclimate.

The humidity level is kept at a level that is acceptable for all the plants within the cluster.

The most important thing to remember regarding humidity, is the greater humid your conditions are the less you need to be watering.

Learn to track the levels of moisture in the soil later within this post. It’s much simpler than you think.

Location of Your Plant

The best location for any plant in your home is a crucial aspect to consider. It is important to consider the type of lighting that your plant needs, as well as drafts , and the location of central heating units.

Another thing to keep in mind when you purchase the Snake Plant is that they are likely to grow very tall, and their center of gravity might not be the best.

Do not choose a location which is likely to be the subject of lots of traffic that could knock the plant over. Snake Plants can tolerate an array of lighting conditions however, you should not place any place that is exposed to direct sunlight.

They are at the risk of getting sunburnedand can make watering more difficult. The ideal situation is for these plants to thrive best on the west or east-facing side of a window however, they will not be happy on a south-facing window.

If your plant is exposed to more sunlight, it will result in an increase in rate of evaporation. This means that you will need to water your plants more often.

In a shaded location, transpiration and evaporation will be less. This doesn’t mean that the plant will not be content.

If you are a gardener, you should be aware of the must monitor the level of moisture more closely until you can determine at what rate your soil’s losing water.

Type of Potting Mix

There are a variety of different kinds of potting mix available on the market. Most of them are designed to improve the retention of water as long as is possible and, to achieve this, the manufacturers include coconut husk or peat.

The two products function as a kind of blotting paper because they absorb water and let it go slowly.

For Snake Plants Snake Plant, water-retentive soil isn’t the best choice. Instead, you need an potting mix that holds nutrients , but releases water very quickly.

I prefer the standard mix of cactus that is readily available at the majority of garden centers that are decent.

In the rare instances that I’ve wanted to plant an Snake Plant and have been not able to find an appropriate mix of cactus I’ve created my own. It’s really simple and here’s my recipe.

Two-thirds of normal pot soil, topped with one-third non-draining materials like pumice, gravel, or perlite.

The potting soil can provide nutrients, but the other items will help in accelerating the drainage.

Don’t get caught about the precise quantities in this recipe. You can make use of whatever draining material is the most readily accessible.

Each gardener has their own method, however the main conclusion is that it is simple drainage.

It is merely a matter of understanding the takeaway is that a moister-retentive soil will retain more water, and it is necessary to add water in line with the soil’s characteristics.

Size of the Plant

The bigger the plant larger, the more water it’ll require. The larger leaves are likely to shed more water and consequently the frequency of watering should be a little more frequently than been if the plant was smaller.

Type of Pot

The kind of pot the pot your Snake Plant is planted into will affect the amount of water your plant will require.

For instance, a glazed pot or one made of plastic does not permit water to evaporate from the sides.

Terracotta is porous, and so certain amounts of water that you put in will evaporate by evaporation from its walls. pot’s interior.

A pot with a porous surface isn’t impossible. A lot of my most loved house plants thrive in their terracotta pots.

It’s all about knowing that I must be aware of the possibility of a loss of moisture that is more frequent and test the soil frequently and then water according to the results.

Size of The Pot

When the size of the container is considerably bigger than the root ball it will have more room for soil, and it will also retain more moisture even when wet.

If the container is large , then a substantial portion of the soil used for potting isn’t covered by roots. This means there is the risk of water overflow.

In this instance the best option is to the water of your snake plant in accordance with the dimensions that the pot is.

This could be an effective way to cut down on how much watering you have to perform. However, this isn’t always the situation.

Snake Plants hate to have feet that are wet as it can cause root rot and a myriad of other problems with overwatering. A lot of these issues can be fatal if they are not addressed promptly enough.

Ideally, Snake Plants like to be kept in pots that are tight and shouldn’t be moved until it is absolutely required.

In reality the flowers we discussed earlier, can only be produced when the plant is root bound.

If you are repotting, choose the size of the pot that is next from the one that your plant is about to outgrow.

It is easy to detect the moment you know that a Snake Plant is getting too big in its pot when the water you provide flows straight through the pot , without being taken or absorbed in any manner.

The potting mixture that holds water, not the roots in themselves. If the pot is fully filled with the root ball you might notice symptoms that are a sign of underwatering, even when you water regularly.

Other indicators to watch out for are roots peeking through drainage holes or trying to escape over the top of the pot.

Snake Plant Needs Less Water When Sick

If your snake plant is covered in dark brown marks, root rots, or your snake plants becoming soft and yellow, then you need to reduce the frequency of watering, in addition to treatment.

Since any type of illness can slow down the processes within the plant, and consequently, it uses less water.

In this article I attempted to explain the essential aspects involved in the determination of the frequency of watering for your snake plant, as well as different indoor plant species.

Here, I’d like to provide some details that can aid you in determining if the plant you are observing is struggling with a shortage of water or is over water.

You May Also Enjoy: Snake Plant Leaves Splitting (Causes And How to Fix)

The Golden Rules of Watering

When you are ready to applying the water on the Snake Plant, there are some rules you must follow.

If you fall and break one or two of them at times It will not cause a catastrophe to the Snake Plant, but if you stick with them, you’ll reap the rewards.

Keep the Soil Evenly Moist

What you’re trying to prevent is that leaves your plant’s roots getting soaked wet for a couple of days. Keep them moist for a few days following that, after that, dry out for couple of days.

This is achieved by understanding how to read the soil and the water at the right moment.

Allow the Soil to Dry Between Waterings

Certain plants are unable to be dry. When the soil is dry the leaves begin to lose their shape and the plant gets fragile and fragile.

This isn’t the situation for this Snake Plant. The plant does not just like that the soil dry out before it is rehydrated – it thrives off this.

Water Early Morning or Water Late Evening

The most suitable time of the day to drink get water is early in the morning, or later in the afternoon, after the temperature begins to fall.

The reason for this is because there less evaporation during these times, and your plant is able to transpire less.

Therefore, it will have more time to absorb water and not compete with the heat.

Don’t Water the Leaves

When leaves get damp the moisture can create an ideal springboard for plant diseases, and particularly fungal diseases that thrive in damp environments.

If you are using a tiny watering container and point the nozzle towards the highest point of the soil, this is a simple issue to avoid.

There are occasions that you may want to clean your plant or even just to keep it spotless, or to get rid of a pest or another.

If you have to do this, bring your plant outdoors on a sunny day and gently spray it with water that is tepid.

Start this process early in the morning, and then place in a bright spot away from direct sunlight until it is dried up. Then, you can return to the indoor location.

Ensure Water Reaches the Roots

If you apply water, make sure you do it thoroughly instead of just feeding the plant with just a few drops at a time. This will allow roots to benefit from the unexpected windfall.

Be sure that the water that you use drains away easily and not get stuck in the pot or in the saucer of the pot.

It is also recommended to make use of filtered water or rainwater harvested and to ensure that the water is at a low temperature.

Avoid Water Logging

The soil that is soaked with water is the most hazardous aspect that the Snake Plant is susceptible to. It is possible to avoid this by first ensuring that your container is equipped with enough drainage holes at the bottom.

If the water is not able to be drained away, then the soil will be saturated with water.

Then, wash thoroughly and place your plant so the water drains freely. Most people let the water to flow into the plant’s saucer, but this can be risky.

When the saucer of the plant gets overflowing, it will drastically slow the draining till the water evaporates out of the saucer.

An alternative is to soak your plant using the sink or basin and then put it back in its saucer after it is completely drained.

Free Draining Soil

If your plant is in the right size pot, and has the required drainage holes and drainage holes, waterlogging shouldn’t be a problem. One exception to this rule is when you use the water-retentive soil for your potting.

We’ve already discussed this before, but it’s an aspect that merits repeating. Free-draining soils are extremely difficult to keep waterlogged.

How do You Know if Your Plant Needs Water?

It’s important to be aware of how to create optimal drainage conditions and the best place to put your plant, however, all this information is useless if you don’t know the time when you’re Snake Plant is in need of water.

In this article we will go over the most simple ways to make sure you only provide water only when the Snake Plant needs it.

The Touch Test

There are a variety of methods to determine when you should drink water. According to me, this is the easiest and most reliable method, and one I am most confident about over any other. My fingers determine that the soil is dry.

When I push my finger into the soil until it is to the level of the second finger (about 2 inches) I can sense if the soil is still damp.

The surface soil may be dry, but there is a chance that there’s water in the soil below the pot.

When I push my finger into the soil, I’m capable of feeling the cool temperature which will indicate that there’s still water. If there’s no moisture then it’s time to soak up the water. It’s as simple as that.

This method does not provide me with any scientifically-based insight about the amount of moisture retention is, or the extent to drying has occurred.

In reality I don’t require this level of precision. I only need to be able to tell that the soil isn’t more damp.

Some people find the idea of putting their fingers into the ground is a snide thought.

If you’re one of them There is an option to accomplish this without getting your fingers all soiled.

Injecting a wooden skewer into the soil can yield an outcome that is nearly as precise.

The skewer should be pushed into the soil until it reaches an extent of two or three inches. If you find that when it emerges there isn’t any soil, the odds are it’s the right time to soak in water.

Soil Color

Another obvious point. The soil that is damp tends to be darker than dry soil, and just by looking at it, you can determine if the soil is moist or not.

The issue with this method is that it tells you what’s taking place on the surface of the soil instead of deeper down.

Wilting or Drooping Leaves

In this case the plant will be telling you that there’s something wrong. If the leaves begin to lose their shape and soften, take a test of the feel immediately.

If your soil appears damp, then it is likely that you have been overwatering and you will need to let the plant dry out more before re-watering.

Brown Leaf Tips

If the leaves begin to turn brown around the edges and at the edges, you’re likely to be submerged.

The brown patches are dehydrated which means there isn’t enough moisture to transport the nutrients to the outside areas on the leaves.

Leaves Wrinkling

If the leaves on your snake plant begin to wrinkle, it is a clear indication that your plant is deficient of water. This is usually a sign earlier than the damage to the leaves previously mentioned.

Leaves change from brown to Yellow

If the Snake Plant gets over watered, the leaves begin to brown, and eventually turn yellow. This is different from the brown spots that appear on the margins and tips that I just mentioned.

The texture here is soft and you must react quickly, or the root rot could begin to develop.

Take the plant out of its pot and give it a few days to dry before repotting it in a fresh pot mix. Then, take a couple of days before watering it again.

The Weight of the Pot

Another way to determine whether the soil is dry. The weight will get noticeable lighter as the water evaporates.

Of course, you’ll need an understanding of how much a plant that is moist weighs in order to measure it, but this will be acquired over time.

The Moisture Meter

Sometimes referred to as the soil probe device can be inserted into the soil, and then provide you with a report of what the level of moisture is. I don’t utilize this device often due to three reasons.

First, you must put it in the soil at exactly the same depth every time in order to get a precise reading. Second I am more confident that I can sense for the presence of moisture.

In the end, I am a jerk and don’t want to spend money on something I can accomplish by using a single finger.


Read this article on the signs of Underwatered Snake Plant and how to bring it back.

Early Signs of Overwatering

Certain signs of overwatering look like underwatering. However, here are some distinct indications of an snake that has been overwatered.

  • Old and young leaves fall over in the same way;
  • The smell of rottenness is evident in the pot. The roots are gone due to the absence of oxygen.
  • The pot’s water dries up after watering.
  • The surface of the substrate is covered with mold. of the substrate.
  • The leaf doesn’t grow and brown necrotic spots are visible on it.
  • Healthy white roots change color from brown.

This article provides more details about saving the Overwatered Snake Plant and provides the most effective methods to revitalize the plant and avoid watering errors.

How to Water Snake Plant?

It’s all well knowing how to water, but you must also be aware of how to properly water. It’s really easy, so don’t be too worried. There are two ways to do it.

The first step is to soak the soil from surface by pouring the water on the soil’s surface with an watering can or jug. Place the pot in the basin or sink and continue pouring water until you can see it beginning to flow out of the holes at the base of the container.

Make sure that the water is directed towards the soil’s surface in order to limit the amount of water that falls on leaves. Then, let the excess water to evaporate and then you’re done.

Another option is to place your pot inside a container that is filled with water. If you keep it for a long time the soil will absorb water by the process of Osmosis.

Then, you’ll have to let the excess water run out. This process takes a lot longer, but can be beneficial if you wish to ensure that your plant receives a complete soak.

I do use it every once in a while, but I most of the time I use water that comes from the highest point.

Watering Snake Plant After Repotting

If you decide to repot plants, standard practice for home plants would be to water the plant after it has been happily placed in the new pot. For Snake Plants Snake Plant, this isn’t required.

Since potting soil usually is somewhat damp, and since this plant prefers to dry between every watering, it is not recommended to apply water until you’ve repotted.

If I repotte the Snake Plant, I normally give it three or four days prior to making any other decisions. Then, I will conduct the test of feeling and determine whether watering is necessary or not.

If you’ve tended to your garden with more delicate home plants, this could be in contradiction to everything you’ve learned.

Be aware that succulent plants and contain a reservoir of water within their succulent leaf and roots.

New potting soil is extremely water-retentive, and the danger of water overflow is much greater than the chance of submerging using snake plants. Snake Plant.

Watering a Propagated Snake Plant

There’s a time where the usual guidelines for watering could be discarded by Snake Plants. Snake Plant. They are incredibly easy to cut off cuttings.

If you’re looking for a step-by-step guide on growing a snake plant, check out my other post here.

Cuttings are a great method to increase your selection and produce plants with exactly the same characteristics as the plant that you started with.

The leaf is usually divided into sections, and they remain in place until the wounds caused by the cuts are be dries and become callous over. It could be as long as one week.

Then, they can be kept in the water in a glass for some weeks until a sturdy root system is able to grow. The new roots must be at least 1 inch long prior to potting them up.

Each cut can be placed in a small, individual pot, or you can mix three or four pieces of cutting in a pot that is slightly larger.

I fill the pots with damp potting soil that is not dry but certainly not wet. I place in a spot that is not in direct sunlight and let them grow into their new home.

I don’t let my soil to dry out completely between waterings as I would do with a mature plant. Instead, I try for the mix to remain just barely moist.

Once the root system of the plant is established, I return to the method of watering described above.

Let’s take a look at the various scenarios in which the requirement for water in your snake plant could change.

Snake Plant Consume an Increased Amount of Water:

  • If there is active plant growth
  • The leaf on the plant may be soft and thin;
  • in the event that the plant has been exposed to direct sunlight;
  • If there’s lots of foliage
  • The roots filled the pot,
  • If the plant is growing in a small area;
  • If the plant is growing with dry conditions (Central Heating);
  • If the plant is growing according to the place of its birth in the wetland or swamp;
  • If the plant is growing in ceramic pots.

The requirement for water in the Snake Plant is reduced If:

  • The plants are secluded after flowering or fruiting.
  • The plants are planted in a cool, dark room.
  • After transplantation;
  • The growth is accelerated in conditions of high humidity;
  • The plant holds water (cacti and succulents).

You May Also Enjoy: Moonshine Snake Plant Care: How to Care for Moonshine Snake Plant

Final Words

Since snake plants don’t require frequent watering, you will need to know how often you water them.

I hope that this article is very useful to you and help clear up the confusion regarding frequency of watering.

Also, make sure you check your Snake Plant frequently and you shouldn’t be in any trouble with it.

Stephanie

Stephanie

Went from a bad gardener to a half-decent one over 10+ years. Super happy to share my tips and tricks with you :)