How to Fix A Top Heavy Aloe Vera Plant

Aloe plants with top-heavy leaves have you thinking about what to do to do with it?

Aloe plants can grow to be top heavy when they’re too large for their pots because they grow rapidly. This means that they tend to be untidy and often slide around, causing damage to the other plants in the home.

Potting an Aloe tree is the most effective solution to correct a top heavy aloe. Make sure to use a pot that is 1-2 sizes bigger and well-drained the potting soil. When repotting, trimming your aloe by cutting off damaged leaves and trimming the leaves on the outside. It is also possible to take pups from the top of your parent aloe.

Why Does My Aloe Plant Not Stand Up?

Aloe plants are extremely popular because of their durability. Even in the most harsh environments they’re virtually unbreakable. Why would a tough algae plant suffer?

These are some of the frequent causes of the aloe plant dying:

Your Aloe Has Developed a Top-Heavy Form

The term “top-heavy” is an elegant method to say that the aloe plant is outgrowing the container in which it is located.

Of course it’s not helping that the succulents’ roots are among the smallest.

Aloe plants, being rapidly growing plants, can quickly take up a lot of space in the container and require re-spacing in order to prevent becoming heavy on top.

Of of course, if your plant is placed in the wrong size container, it’ll struggle to stand up in the way it needs to.

In the end, it could be prone to falling over and harm the other plants. Even more, it could damage its leaves and cause its stems to break in two.

Wrong Potting Mix

Aloe vera is thriving in a variety of soil types, ranging from sandy to loam. When it is potted the medium for growing should be well-drained.

Their natural habitats are typically comprised of hills, which is why they’re accustomed to having excellent drainage.

Root rot and fungal infections may occur when the soil isn’t adequately draining. Thus, the roots could be damaged, which can cause the aloe plant to fall over due to the pressure of leaves.

If you’re not sure what to do with your personal aloe blend purchase a pot of cactus mix instead (Check the most recent prices at Amazon right here).

The drainage properties could be enhanced by adding perlite, sand, or vermiculite.

large aloe vera plant

Watering Issues and Root Rot

The positive side is that aloe plants can withstand dry conditions very well.

If you are watering your plant, it is important to let the growth medium completely dry between each of them.

The leaves of aloe will change color and then collapse if they are exposed to extreme stress in water, like prolonged drought or excessive watering.

If there is an aloe plant outside, don’t feed it any additional water during the wet season.

Be aware that the majority of aloe plants are dormant in the winter cold So, don’t water them.

Temperature Stress, Cold Drafts, or Frost

Aloe plants thrive and are in top condition when temperatures are between 55 and 80degF (13-27degC).

It is able to tolerate temperatures that are as low as 40degF (4degC) It is not able to stand cold or frosty drafts.

Like all plants, it requires the proper conditions to develop strong roots and remain balanced.

Aloe leaves will shrink when temperatures are too high, and the plant won’t grow as it should.

Temperatures that are below 40degF (4degC) as well as cold breezes can also harm the roots of aloe plants and expose them to fungal and bacterial infections , as well.

However, it could result in the same outcome that the plant can slide over or fail to rise in the proper place due to root issues.

Poor Light

Aloe vera can be described as a drought-resistant, sun-loving plant that is drought-resistant and sun-loving. It is recommended to place it in a place which receives plenty of sun however, not direct sunlight to keep the delicate leaves safe from burning.

However, if you fail to give enough sunlight to your plant over long periods of time.

If it is not the plant may not be able to stand , and it could even fall over. Lower leaves will change color when it is discontent about the absence of sunlight.

How to Fix a Top Heavy Aloe Plant

An aloe plant that is top heavy is probably too large for its pot and could be sagging or collapse. Repotting is the easiest and most efficient natural solution to this issue.

Here are the most important steps to divide, tidy up and repot your heavy top aloe plant:

Step #1: Harvesting the Large Outer Leaves

Let me make it and clear: never take the leaves in the middle. They play an essential part in the overall health for the plants.

Outer leaves are generally larger in size, and also heavier. Therefore, they comprise the majority of aloe vera’s weight on the highest elevation.

The bigger leaves on the outside of your aloe plant may be cut to prevent it from getting too big.

Additionally, you can make use of their gel for cosmetic and medicinal reasons by cutting them off in the middle.

Aloe leaves can also be stored in dry, cool places. Naturally, it’s possible to could throw them away when you no longer require them.

Utilizing larger leaves can result in a lighter plant that is less likely to tip over.

Step #2: Dividing Your Top Heavy Aloe Plant

The first step is to take out the plant that is too heavy on top. After that, take all of your root systems as best you are able to. It will give you a clear view into the ball of root in this manner.

It’s time to determine and separate the plantlets or pups at this point.

They can then be easily separated from the mother plant and planted separately.

It would be wonderful if the roots are able to be split. However, if they do not have any roots, the chance of survival is virtually none.

Cut off any pups that can’t be easily separated by a sharp knife, sterilized or other scissors.

Step #3: Allow Divided Aloe Plants to Heal

While pups, shoots, and leaves in whole form can be removed from their parent plants, it is crucial for them to recover.

If the cut is kept at the correct location the wound will heal in approximately 24 hours, during the time, a callus will develop around or over the cut or wound.

Step #4: Replant/Repot Your Aloe

After you’ve cut off an adequate portion of the plant’s base It’s best to give it a few weeks to recover. This allows the area that was cut to heal and form the appearance of a callus.

To form an extra layer of protection, place the dried leaves over the gel, and allow them to completely dry.

To make this occur, it will be between 2 and 3 days for this to take place.

Next step, mix the soil mix and then bury the leaf to one third in its thickness. Make sure to spray a tiny amount of water on the leaf.

In the initial 30 days following transplanting, ensure that the potting mix is moist , but not too wet. It must, naturally not be soggy or wet.

The new roots of Aloe will begin to sprout shortly after the transplant is completed.

Place it close to a window that receives plenty of sun as well as only watering it as needed (around every week).

Fixing Top Heavy Aloe Plant by Trimming

A plant of aloe that is too large at the top can be easily cut to make it less heavy.

A neatly trimmed aloe plant that doesn’t fall over, permitting you to get rid of the dead or unattractive plant matter will result.

The trimming of a plant with a heavy top involves three steps. Here are a few of the most well-known ones:

1. Begin by pruning your Aloe Plant.

A pair of knives, scissors, or gardener’s shears are the ideal tools to accomplish the task. However, before you do that you need to cleanse and disinfect the tool using a 1:10 solution of water and bleach.

Be sure that the instrument is sharp enough so that you don’t cause more damage than the aloe plant. Sharp or sharp cuts require longer time to heal.

2- Cut Away Damaged Leaves

The time to trim is the perfect opportunity to trim all leaves that are dead or diseased or damaged. In general avoid any leaves that are brown or discolored.

3. Prune Outer Leaves

The leaves on the outside of the aloe plant are bigger and heavier than the leaves that are inside.

It is therefore beneficial to eliminate them in order to allow the remaining breathing space.

However, the most important thing is that it can help remove some of the weight off at the very top of your plants.

How To Repot A Top Heavy Aloe Plant

This is how you can transplant or repot an over-heavy aloe plant:

1- Pick the Right Pot

If you are reporting your aloe plant, make certain to use a pot that has a good drainage. The pot must be one size bigger in depth than width. If there are three or more drainage holes, I would prefer the terracotta pot.

2- Select Proper Potting Mix

Don’t reuse your pots or soil. Cacti mixes are commonly utilized in my aloe plants.

Perlite, or orchid bark, or coarse sand are all you need to ensure they’re well-drained however, a bit of loamy soil is the ideal choice. (Source: North Carolina State University)

3- Set Up the Pot

Make sure to cover the drainage holes by putting a screen or paper towels on the bottom. This will stop soil from slipping through.

4- Plant Your Aloe Vera

The new pot should be filled with water to around one-third of its capacity. Then, move your aloe plant into it. The roots will be covered with a soil mix.

5- Finishing Touches

Incorporate more orchid bark on the top of the soil , and gently sprinkle with water. It is possible to use stakes to hold the plant in its place until it is re-established within the pot.

How To Support A Top Heavy Aloe Plant

To support an aloe that is top heavy plant, you can use stakes and string of jute.

Stephanie

Stephanie

Went from a bad gardener to a half-decent one over 10+ years. Super happy to share my tips and tricks with you :)