Philodendrons like the Atom are renowned for their capacity to remove pollution from the air So why not grow this plant to provide your home with clean and oxygen-rich air? There are several methods to grow the plants, and fortunately that they are all easy to propagate. Philodendron Atom is resilient and rapidly growing, so if you follow these tips and you’ll have a rosy and philodendron-filled house within a matter of days.
Here’s how you can propagate your Philodendron Atom:
- Propagate the cuttings into water or soil.
- Sow Philodendron Atom seeds.
- Air layering is a great way to establish the roots of your Philodendron.
This article outlines the various ways to propagate the Philadelphia Atom and the different methods involved, as well as strategies to achieve better results. In the final part the article I’ll provide a few answers to questions regarding this Philodendron Atom.
Tips For Caring For Your Philodendron Atom
Here are the most important points to be aware of when taking care of the Philodendron Atom
- Watering: Only water when the top 25 percent of the soil has dried. It is only necessary to water it a couple of times per week.
- Lighting Conditions: Bright but indirect light. Direct sunlight can cause burning of the leaves.
- Humidity: Philodendron Atoms enjoy 50%-65% humidity. It is possible to keep the area sufficiently humid for your plant by using humidity trays or by placing your plant in an apron with Pebbles, water and pebbles.
- Leaves that are yellow They indicate the plant may be suffering. This could be due to excessive watering, inadequate lighting or insects. Determine the root cause as quickly as possible so that you can address the issue.
- Temperature: Philodendrons Atoms are happy in warm temperatures, ranging from 70degF-80degF (21degC up to 26degC). Extreme temperatures can harm your plant, so do not put your plant near heating or air conditioning units.
1. Propagate Cuttings in Soil or Water
Propagation using stem cuttings is a technique that requires a well-established and healthy plant. Cuttings from the plant you have and establishing them in water or soil is among the most efficient methods to multiply your plants, particularly those that are the Philodendron Atom. Additionally, you’ll have a an excellent probability of success using this method.
1. Water Your Philodendron Atom
Soak the soil around your plant do this a couple of days prior to when you intend to cut your pieces. The watering process ensures that your Philipodendron Atom will have time for it to take in the nutrition that it requires by soaking up the moisture of the soil.
The watering prior to cutting can help the stem to be stronger prior to putting it through the strain of being cut from the other plants.
2. Select Where You’ll Make Your Cutting
Select one of the older stems, and not the younger springy ones. A stem that is too young will begin to rot. Additionally, you should choose an option with many nodes.
Nodes are the area of the stem that leaves begin to develop. These joints with bumps are where the roots of your cutting will grow out. Sometimes, you’ll see roots that are errant develop from nodes, even in the case of a stem that is attached to the plant’s main stem.
Select a stem that has many nodes, and minimum two leaves attached.
3. Cut off a Stem 4 to 6 inches (10-15 cm) long
If you cut the stems, you should make your cut in two nodes. Cut as closely as you can to the node portion of your cut, since these are the areas the point where your roots will grow out later.
If the length of the stem after that node has become too long the roots won’t grow properly, and you must to make sure that the cutting is strong and exactly-sized.
If you own an herb that has multiple stems, you should try to make more than one cut to increase the chances that at the very least one will grow.
Cut just above the node line with an hygienic, sharp knife.
You can pick up this Linsen Outdoor Pruning Knife to ensure that you can have a tool specifically for gardening. The stainless-steel blade measures 4 inches long and can fold into its handle made of wood for more convenience.
4. Prepare Your Cutting
If your cut has a lot of stems and leaves, cut off the lower ones close towards the point. Make sure you leave a couple of leaves along the stem, perhaps up to four.
This will give you an appropriate length for cutting off stems and leaves, and it’s the part that’s placed in the soil or submerged in water.
5. Place Your Cutting in Soil/ Water
The soil or the propagation medium should be loose enough to drain properly, but also enough to hold your cutting and ensure it stays upright.
It is possible to add sand, perlite, bark, or other propagation media to create a soil mix that is fluid, airy, and well-draining.
Select a container that is small enough to hold your soil. Fill it with soil, leaving about one” (2.5cm) in space from the bottom of the container, and your soil’s level. This will permit for you to shift the soil as you place your cutting. Be sure that each cutting has its own containeror pot.
Make sure you moisten the soil before putting the cutting into it about 1″ to 1 1/2 ” (2.5 to 3.8 cm) deep. This is the right depth for the soil to hold the cutting as well as new roots.
It is possible to move the soil around to make sure that your cutting stand straight within the container.
If you decide to plant your cut in water. In this case it is recommended to make use of a transparent container so that you can observe the inside and monitor the progress of rooting.
It is possible to add a roots-building hormone to encourage the development of new roots however, this isn’t required because Philodendron Atom Philodendron Atom roots easily. But, the hormone that roots will always increase the odds of success when it comes to propagating plants.
6. Cover Your Container With Plastic
Covering your propagation vessel with the plastic wrapping or plastic lid will hold in moisture and provide humidity to the cutting, thereby encouraging the growth of your roots.
To ensure that fresh air can be able to get into the cutting area, make holes in the plastic so that air circulates through it. You can make use of anything from sheeting of plastic or an empty grocery bag.
The seedsling MIXC seed starter tray removes the requirement for a separate sheet of plastic or bag as it has an variable humidity dome.
7. Place Your Cutting Somewhere With Bright, Indirect Light
The Philodendron is a perennial plants that thrive in warmer temperatures. If you’re propagating a cut the temperature must be slightly higher than normal to encourage growth – approximately 70-75 degrees Fahrenheit (21 degC to 24degC).
Make sure you don’t expose your cut to direct sunlight. This could cause burns to the leaves and slow down growth of the root. The new growth can be seen within a period of ten days to two weeks.
If you are propagating in soil pull your cuttings gently after about four weeks to determine whether they’ve begun to develop roots. If you feel resistance, they’ve. The Philodendron is fully replanted within about 4-6 weeks.
Be on the lookout for new growth that is sprouting up above the soil. The cuttings are growing roots when you notice new leaves or tiny buds.
If you are propagating in water you should wait till the roots are a couple of inches before you repot them in the soil. Ideally you’ll want to wait until the roots have begun to grow into the shape of a ball before repotting your cutting.
Make sure you replace your container’s water each three days as you wait for the roots of your plant to develop. The roots will begin to develop in 10 days or so.
8. Repot Your Philodendron Atom
With a healthy growth of the roots Your Philodendron Atom is now ready to be transplanted.
If you are growing in soil, make sure to make sure to water your plant every day before you plant it in a new pot, to give it a chance take in all nutrients that it requires. It also reduces the strain on the plant from transplanting.
It is recommended to use a pot that is two” (5cm) larger than the root ball. Do not choose a large pot, as it could cause excessive watering.
The new pot should be filled with moistened potting media. Do not compress the soil by pressing the soil down. The soil’s level should be about two inches (5cm) or less at the highest point of your pot.
Remove your rooted cut from the container and then put it back in the new container. You can gently move a few roots to the outside to release the root ball.
Put more potting medium in your root ball till the plant is able to stand on its own. Make sure you put soil into the gaps in the root ball. Press gently on the potting medium while you add more to the pot.
Do not put a lot of potting medium on the root ball of your plant. Too much of a top layer could cause you to overwater the Philodendron Atom in the future because the top layer could appear dry.
The Gepege ceramic beads Pots are ideal for the permanent home. They’re not overly large and have mesh pads to stop soil from overflowing from drain holes, as well as also have saucers that can hold any excess water.
2. Sow Philodendron Atom Seeds
The process of growing the Philodendron Atom from seeds takes more time than if you started with a cutting. It’s still an alternative, particularly when your mature philodendron has created seeds to you. Seeds don’t have to be watered prior to when planting them.
1. Place Your Seeds
It is recommended to put 2-3 seeds into each container so that you increase the chances of at the very least one seed sprouting.
Select a pot that has enough space to accommodate each seed with a minimum of 1/2 inches (1.8cm) distance around the seeds. This will allow seeds the space to germinate and grow.
Place the seeds in the potting medium about 1/3 ” (1cm) in depth and the soil lightly.
2. Care for Your Seeds
It is essential to ensure that the soil is kept damp as seeds begin to germinate, so make sure you water it often.
The soil should be kept at a temperatures between 68 and up to 73 degrees F (20 degrees Celsius to 22 degrees Celsius). If the conditions are right the seeds will begin to germinate within 2-8 weeks.
If the seedlings grow strong enough, it’s recommended to place each one inside a separate container so that it has more space to develop and grow strong roots.
3. Use Air Layering To Root Your Philodendron
Air layering is not the most popular method of propagating the Philodendron Atom.
This method is a good option in case you are limited space, don’t want make a separate container to grow cuttings or lack the time to wait for seeds to germinate.
Layering is a method of propagation in which stems remain connected with the parent plant, and are allowed to root via the rooting medium.
In general, this method is more effective than propagating your plant by cuttings. This is because the plant that is layered will be supported by the parent plant, while developing its own roots.
Air layering is accomplished through wounding of the stem and cutting between 1 and 1.5 inches (2.5 cm to 4 centimeters) beneath the node. Make use of a toothpick that is thick to hold the wound open. After that, wrap a few ounces of sphagnum moss that is moist around the cut. Make sure that the moss remains damp to encourage the growth of new plants.
Cover the moss ball by covering it with plastic wrap, and use first-aid tape or electrical tape to close the ends. Within three weeks to a month you’ll be able to observe new growth of the root by removing the wrap.
When the roots are clearly visible the layered plant is ready to be removed from its mother and put in the pot. Make use of a sharp knife to cut off the stem or trunk beneath the layer. Take off the plastic and tape before placing the stem into the potting soil.
Frequently Asked Questions
Is Philodendron Atom Rare?
It is the Philodendron Atom is one of the rarer kinds of Philodendrons. With its glossy, wavy green leaves, and small dimensions, it is renowned for its toughness and is ideal for those who are just beginning to learn.
Philodendron Atoms are an subtropical plant that is found beneath the canopy of trees as well as in the forests floor, therefore it requires an environment that is warm and humid as well as bright indirect light.
Can You Grow a Philodendron in Water?
It is possible to grow a philodendron in the water for a long time, based on the type. Philodendron Atoms are not able to grow in water on their own So be sure to plant your cuttings in the same manner as you notice strong roots.
Certain kinds of Philodendrons like The Heart Leaf Philodendron (Philodendron cordatum) and the velvet leaf vine (Philodendron micans) can thrive in water for a long time. However, Philodendron Atoms are not one of these varieties.
It is possible to plant the Philodendron Atom cutting in water. However, it’s not recommended to plant them frequently in a container of water.
There are three primary methods to grow the Philodendron Atom. These include rooting cuttings into soil or water or soil, planting seeds and air layering. Each has distinct advantages, and cuttings is the most popular method because it’s easy to do.
But, growing your philodendrons from seeds is incredibly rewarding and the ability to create an air layer can be an exciting experience, so you should test each method to determine which one is the best option to you as well as your Philodendron.