Last Updated on December 6, 2022 by Stephanie
Strong, durable, and sporting beautiful colorful leaves The rare philodendron ring that is lit by fire can be a renowned plant that is able to become an iconic piece in any space of your home.
Its an hybrid plant that combines the finest philodendrons can provide. It needs care and patience to achieve its full potential. Dont fret that all your efforts will be worth it.
The philodendron ring of flame is an easy plant to care for. It requires moderate temperatures, humidity and careful watering every each week, it can produce stunning, diverse shades year-round when it is given a little care. Be aware of the soil, pests, and the sun to help it achieve its full potential.
Today, I will teach you how to manage your brand new Philodendron ring of Fire. By taking a few easy steps, you can make sure its flourishing and thrive.
Table of Contents
Why should you keep an Philodendron Ring of Fire?
The name of the plant is Ring of Fire, one of the most distinctive characteristics of this philodendron is obviously its stunning diverse foliage color. You can expect up to five distinct shades throughout the year, that range from stunning reds, oranges and pinks, to whites and greens.
Overall, its a stunning plant that will delight and enhance your house. The leaves themselves have an attractive, jagged form, and I believe youll like the look and is textured and tactile.
The plants purifying effects on air are an additional benefit that assists in removing airborne contaminants that are mild. Consider it an organic bio-filter that can help increase airflow in any space that you put it in.
Although its tropical in appearance, it performs well in normal room temperatures. Because its evergreen, it will provide abundant foliage all through the entire year.
I also like that the philodendron fire ring is simple and easy to care for. They are tough, durable plants that are both resistant to disease and pests. The only thing you need to find a way to balance is the frequency of watering.
The philodendron Ring of Fire is a rare, exclusive hybrid plant that isnt found in many gardens. If you find it, you can be sure its a standout plant and an investment worth the money you make.
Philodendron Ring of Fire Care Details
First Steps After Purchase
Examine the plants health at first Although the Philodendron fire ring has different colored leaves It is important to look for dark spots or unusual discoloration as well for signs of rot and decay on the leaves. It is also important to look for indications of pests such as thrips. Thrips leave black spots on the leaves as do spider mites and mealybugs gnaw at the leaves sides.
Root check - With your new plant, flip the plant over and examine the root system. If you notice signs of decaying roots then use a sterilized knife or shears to remove the affected areas.
Slow-growing - since the plant grows very slowly and can be kept in pots for quite a long period of time. Therefore, you should invest your money carefully and select a plant that is able to drain well enough to let excess water drain away.
Location - since the Philodendron fire ring has average room temperature and humidity, you are able to put it in a variety of rooms of your house without worry. However, the plant can be poisonous. Keep it out of the reach of small pets and children.
How to Care for Philodendron Ring of Fire
Watering Philodendron Ring of Fire
The Philodendron is native to the tropical areas which is why theyll benefit from plenty of watering. However, as with all plants the equilibrium is crucial. If you drink too much water, you could cause harm to the plant. If you dont, itll die from thirst!
Here are some suggestions to remember:
- 2-inch rule: Consider watering your plants when two inches above the soil are dry, which is usually every week. The soil should not be too dry, nor too wet.
- Drainage: Make sure that the soil inside the container is well-aerated and drains properly. The water should be allowed to be able to drain down to the roots, but not cause soil to become stale and sloppy. Be sure to drain any excess water away.
- Distilled tap water typically has harsh chemicals like fluoride and chlorine, which could harm plants. I suggest using filtered, distillated water.
Philodendron Ring of Fire Light Requirements
The Philodendron light ring is a favorite in low and moderate lighting conditions. Be aware of bright areas with indirect light. They are known as great climbers and can develop quickly towards light sources. They are also known for growing in a controlled environment as well.
Avoid direct sunlight because it can cause stress to your plant, and dehydrate it, and make it more difficult to achieve the proper balance in watering it. The suns rays can also cause scorching and cause discoloration of leaves.
Do Philodendron Ring of Fire Like Humidity?
Originating from tropical regions, its not a surprise that the philodendron circle of fire is tolerant to average up to high levels of humidity. In indoors, an average humidity of 30-50% is higher than what is ideal.
If your leaves are brown tips, you might require a boost in humidity to aid in bringing moisture back into the plant. Spider mites can also be an indication the plants condition is very dry, since these insects thrive in dry environments. It is possible to remedy this by lightly misting your plant with water that has been distilled, but be cautious not to overwater your plant.
Another way to increase humidity is to place your container or pot on an unfilled tray that is filled with stones and water. The roots will never become too wet and the humidity will rise.
The philodendron fire ring thrives in rooms with average temperatures that range from 60 to 75degF (16-24degC). This is why it is possible to place them in a variety of rooms within your home.
However, being an exotic plant the philodendron rings of fire are vulnerable to drastic changes in temperature. The cold can be particularly fatal and its crucial to ensure they are well cared for in winter.
Keep your plant from changing temperatures in your home like close to doors, windows vents, drafts, and windows. When temperatures are higher the plant will develop slower, and dehydrate faster and will require a greater vigilant attention.
Philodendron Ring of Fire Soil
For your philodendron to be set to be successful, you have to give it the most suitable soil. Peat soil is an excellent choice because its damp, well-drained, and will not dry out the roots or plant. The soil must have a pH between 6-7, which can be slightly acidic.
Fertilizing Philodendron Ring of Fire
The Philodendron fire ring is a plant that grows slowly. Therefore, it isnt necessary to fertilize them as often. However, you likely will wish for your plants to have the greatest chance to thrive in the long run. What are your options?
Slow-release fertilizers are the best because the plant will be able take in nutrients at very own rate. Select one that is rich in ammonium nitrate , which will help the soil to become acidic. Fertilize in the growing season of summer and spring to encourage new growth.
Propagating Philodendron Ring of Fire (Leaf and Stem Propagation)
If youre a lover of the philodendron-philodendron the fire ring, youre lucky! With just one plant, youll be able to create more and more of the ring through stem and leaf propagation.
Do not worry if youre just starting out and arent certain of how to go about this Ill walk the steps.
Propagating in Water
Propagating plants in water is one of the most simple methods to try because it requires no equipment and just a few steps. Its the perfect way for novices to master the fundamentals. It will be easier to identify the new growth more easily than soil-based propagation.
I strongly recommend using the purified, distilled water you can get from your propagation. The tap water you use may contain fluoride and chlorine, which could be determinant to cuttings.
- Choose a stem with leaf nodes. Cut it to at minimum 3 inches in length using scissors, sterile shears or a knife.
- Place the cut in the jar or glass and then fill it with water. The root side should be facing downwards, with the nodes submerged in water.
- Choose a location that is shaded that is exposed to indirect light.
- Refill water every week to replenish oxygen and nutrients.
- There should be some improvement within a matter of two weeks.
How to Repot Philodendron Ring of Fire
Philodendron Ring of Fire is a slow-growing plant so it isnt necessary to think about having to repot it frequently. However, after a few years in growth you might want to increase the size of the size of your plant.
Heres what I would recommend:
- The ideal time to repot your philodendrons ring of fire is during the off-season. Pick winter or autumn.
- The roots of the philodendron fire ring are strong and have a trunk-like central part. Tap your plant gently on its side before removing it from the pot in which it is currently.
- Rub gently away any soil that has been clumped around roots.
- With sharp scissors, shears or knives, you can cut off dead or decayed portions of the roots.
- Put your plant in the middle of a larger container. Make sure to use a fresh potting mix Remember, peaty soil is the best!
- Make sure your new container has drainage holes that allow excess water to drain away.
- Then, slowly pour the water in and check to see if the water is able to get to at the base of the pan.
Propagating in Soil
One of the primary reasons why gardeners propagate their plants using soil instead of water is that, if the cutting is established it will grow more robust, stronger roots. However, it requires a vigilant eye since the soil could be contaminated with fungi or bacteria that can cause death to cuttings that are vulnerable.
- Choose a stem with leaf nodes. Cut it to at minimum 3 inches in length using scissors, sterile shears or a knife.
- The container or pot should be filled with draining and peaty soil. Make sure you have drainage channels in the bottom, allowing the excess water to drain away.
- Create a small indent using your fingers to create an opening for the cutting. Set the stem down. Dont submerge the leaves in soil.
- Set your new cut in a protected area that receives indirect sunlight. Water gently so that the dirt stays damp.
- Expect to see new growth and the growth of roots to occur within 5 or 6 weeks.
Pruning and Trimming
While philodendrons are known to be excellent climbing plants , and can develop towards a light source the fire ring is one of the varieties that is a dance to its own, slow drum. Therefore pruning and trimming is not usually needed.
It is possible to cut your plant at times if its been distorted. This is usually the case in the spring and summer months when the new growth is apparent. Always make sure you use a clean, sterilized knife, scissors or shears for trimming.
Remember that you might be able to reproduce by cuttings, so be sure to check before disposing of plant material!
The Ring of Fire is a slow-growing variety of philodendron. However, according to my experience, it is definitely and definitely worth the waiting. It is a flowering plant that grows in the spring and summer months. It can grow to a maximum height of 120cm with its large and vibrant leaves.
Fertilizers can speed the growth process, but from my experience, its not always required. If youre looking forward to seeing new growth, I suggest selecting a slow-release fertilizer that will not overburden your plant. Apply fertilizer early in spring to stimulate the growth of new plants.
Do Philodendron Ring of Fire Bloom?
The fire ring in the Philodendron typically does not flower. Common Philodendron Ring of Fire Problems and How to Fix Them
The philodendron ring of flame is a fan of regular irrigation. However, showering it frequently could cause more issues than you believe youve fixed.
The roots of your plant are prone to water loss, which causes them to become suffocated. They are unable to absorb oxygen and vital minerals from soil. What happens? The entire plant will fail.
The signs that a plant is overwatered are:
- Leaves - appear wilted despite moist soil. They change to a pale yellow/green hue, dropping down, and then falling off early.
- Edema is a small bump or blister on leaf surfaces that are filled with water.
- Root rot is a fungus that thrives in humid conditions. Insufficient water in the soil can cause the roots to rot and turn mushy, brown, and emitting a unpleasant smell.
A few ways to reverse the negative effects of watering too much and revive your plant are:
- Stop watering right now. Water only once the top two inches have dried.
- Re-pot in a new pot using a fresh mix. Make sure that the soggy soil that has clumped up on roots is removed gently.
- Prune damaged roots and leaves
Like all plants, you should keep an of your plant for signs of pests. While these plants are generally robust but there are three primary aspects to be aware of.
Thrips are also known as thunder flies, can be an extremely harmful pest to your plant. They bite and suck on the new growth, which is then damaged and overgrown. They also transmit diseases when they feed.
The next thing to consider is mealybugs, which are tiny bugs that have a white-cotton look. They also bit plant leaves to absorb the juices.
Lets also talk about spider mites. While these insects thrive in an environment that is dry and arid however, they can create problems for your plants.
The most obvious sign that they are present is the appearance of white threads and dust on the foliage. If your plant is full of spider mites, it could also mean that its been submerged.
How do you eliminate all of these bugs? Youll be glad to know that I have an easy and simple solution!
Apply a soapy water solution (or rub alcohol) to the plants leaves and stem using the help of a cotton bud. Let it sit for a couple of hours before cleaning it using distillate water.
Here are some of the most common illnesses that your philodendron ring fire could be susceptible to.
- Erwinia blight is caused by a bacterium that attacks new leaves This blight can affect the leaves, causing dark yellow or dark green spotting that spreads rapidly. Older leaves can appear wet with the appearance of lesions. Copper-based bactericides can be effective in slowing down the growth.
- Rust is an infection caused by fungal bacteria which is prevalent in philodendrons, and leaves unsightly spotting on leaf surfaces , and leaves that fall prematurely. It is spread by spores. The only actions you can do is to remove the affected, dead parts from the plants.
- Root rot is a clear consequence of excessive watering the root system, it causes the root system of your plant to become brown, mushy and release an unpleasant smell. It is easy to fix this by removing the plant from its pot and turning it over upside down, and then examining the roots. Utilizing clean shears, remove the affected areas and then repot it in a new container.
Black Spots on Leaves
The color of leaves is a distinctive aspect of the philodendron ring of fire. Black spots are a dreadful color, and are a clear indication of issues in the health of your plant.
Lesions or black spots can be the result of an infection caused by a fungal or bacterial source. The sooner you recognize the signs and take action the better your chances of a successful outcome for your philodendron ring fire. Unfortunately, both fungi and bacteria show the same types of symptoms.
- Utilizing a sterilized knife or shears, remove affected areas.
- Eliminate any pests that could be the source of transmission
- Make use of a fungicide containing copper, since this is extremely efficient in protecting the plant tissue
- Plant your plants in a fresh container, using a different mix.
Philodendron Ring of Fire leaves Falling off
The leaves falling off too early is an indication of poor watering. Overwatering or underwatering may cause this problem. While philodendrons love regular watering, theres always the chance of overdoing it.
If caught early the negative effects of water overflow can be reversed easily. Reduce the amount of water you are using. One good guideline is to water your plants when your soil is dry for the initial two inches. typically, this is every week, at least once.
The Philodendron leaves have brown spots. Ring of Fire leaves
Brown spots on leaves are a source of worry for anyone who owns a philodendron. Unfortunately, there could be multiple reasons for this.
First, it could be an indication of a fungal infection like the one mentioned previously rust. Take care to eliminate the affected area in order to stop the spread.
The effects of dehydration and water may contribute to the browning of leaves. Make sure to use distilled water to prevent harmful chemicals that could harm your leaves and to increase the frequency of watering.
Due to its tropical roots It is possible to gently mist leaves to keep some moisture on your plant. Place your plant in an area shaded so that it doesnt get dehydrated by direct sunlight.
Philodendron Ring of Fire Leaves Curling
Keep in mind that your philodendron rings of fire loves frequent irrigation. Curling leaves are a sign the plant desperately trying to save water.
Gradually increase the amount of watering. Make sure that the soil is well-drained and well-aerated, so that the water is able to sift down into the soils bottom before reaching the roots.
Toxicity - Is a Philodendron Ring of Fire Safe?
Like all philodendrons the ring of fire is made up of calcium Oxalates. If consumed, they can cause mouth swelling as well as difficulty swallowing as well as vomiting. Be sure to keep them out of the reach of young children.
What do you think of dogs and cats?
Like the majority of plants that are mildly toxic The symptoms are more severe for dogs and cats. If your pet shows symptoms of discomfort, swelling or vomiting I would advise you to take your pet to the veterinarian immediately.
General Philodendron Ring of Fire Care Tips
- A healthy philodendron ring of flame will display a variety of leaves with a variety of colors. Be aware of spots of black and brown - that are reason to be concerned.
- As a tropical plant your philodendron can enjoy temperatures between 60 and 75 degrees (16-24degC) and is ideal for every room of your house.
- Do not place your philodendron in direct sunlight.
- At risk of thrips, mealybugs and spider mites. Check regularly the area for marks of bite on any new growth, and for black flecks to determine the presence of insects.
- Make sure to water your plants by using distilled, purified water to stay clear of harmful chemicals.
- Water only in the first two inches of the soil is dry.
- Maintain the humidity of your room at 30-50 percent. To increase the humidity, lightly mist leaves.
- If youre looking to boost humidity then you can mist the leaves of your plant.
- Signs of excessive watering: limp leaves , brown spots, and white fuzz that grows over the top layer of soil.
- Signs of submersion - leaves curling upwards and new leaves have a sagging appearance diminished growth, and the soil that is rough and hard to touch.
- Philodendron Ring of Fire moderately poisonous. Keep it away from pets and children.