How To Grow Red Emerald Philodendron

Philodendron Red Emerald care is very easy. With a humidity of around 60 and temperatures that are above 55degF and direct light that is bright the plant will thrive. Be sure to have an organic or liquid fertilizer that you can apply every 4 to 6 weeks, and a consistent routine of watering to get your plant to the top.

Being aware of how to take care of Philodendrons can keep your plant healthy (and well). Because the plant is from the tropical regions of America You’ll need to simulate the conditions that will ensure your plant is healthy and flourishes.

It is also known as the Philodendron Erubescens also goes by Red Emerald, Blushing Philodendron, as well as Emerald Red. If this is your first garden baby, you might be unsure of what you should do.

Continue reading to learn more about the best conditions to keep your plant looking as stunning as it was the moment you got it.

From fertilizer to repotting, timing of watering, light, temperature and humidity Here’s everything you must be aware of about Philodendron Erubescens maintenance.

How Do You Identify A Philodendron Red Emerald Erubescens?

With all the kinds of Philodendron available The most important question is how do you determine if a Philodendron is one of the Red Emerald? If you’ve seen an edmundsia with red stems and thick thin green leaves, you’re lucky.

It is important to note that the Philodendron Red Emerald should not be confused with the Green Emerald Philodendron or Ruby Philodendron. The main distinction in the Red Emerald is that Red Emerald unfurls new leaves with a deep reddish (reddish) hue.

When it matures, the leaves will turn stunning green. It could be confused with other Philodendrons which remain red. This hybrid displays a variety of stunning shades in one leaf over time.

Philodendron leaf

Philodendron Erubescens Red Emerald Foliage and Flowers

The red stem of Philodendron is the principal draw, however the leaves that are emerging are a vibrant deep red too.

The leaves are longer and thinner than typical Philodendron varieties. It’s designed with a pinnate design on the main stem, giving it a more full appearance.

Erubescens Philodendron is a typical flower that has a cone-shaped pinkish-red spadix and spathe. It is a flower that resembles an Arum Lily but it is closed flowers instead of a wide-open. The flower typically blooms when the plant is mature.

Philodendron Erubescens Red Emerald Soil Requirement

What are the ideal conditions for soils to grow Philodendron Red Emerald? Philodendron Red Emerald? There are several alternatives to think about, including loamy soil and LECA ball. Each has advantages and drawbacks.

Loam soil typically consists of three parts silt, clay, and sand mix. Clay is a great component to be added to soil due to its ability to retain moisture, while sand provides good air circulation. Silt is a mixture of clay and sand properties and enhances the retention of nutrients.

In the event that you do not have any loam soil it is possible to make a mixture consisting of equal parts of regular potting soil or compost and sand.

This allows you to recreate the conditions of loam soil. It is possible to add perlite or even a few pieces made of the pine tree to increase the Aeration.

The most difficult thing in soil is finding the proper balance between the elements that will ensure the soil of your plant remains damp without becoming too wet. Also, it must be sure that it is able to drain properly.

If you don’t enjoy the pleasures of having the earth beneath your feet, LECA balls are a excellent alternative.

Although they can be difficult to grasp initially, you’ll need to wash your brand new set of clay pebbles, then put them into a pot, and then plant the plant in your Philodendron Emerald Red.

The only drawback of LECA is the absence of natural nutrients that are present within the ball. To remedy this issue, you’ll need to fertilize your plants frequently.

Red Emerald Philodendron Watering Requirement

The watering of your red-stemmed Philodendron needs to be performed every 7-14 days. It is essential to ensure that the soil remains dry but not too wet as tropical plants require plenty of water. It is essential ensure that your plant gets enough water to stay dry until the next watering.

If you’re not sure how often to water your plants it is possible to use an soil water meters ( hygrometer) to determine when the soil is dry.

It is typically a good indication of how often you need to water and the amount of water you should use. Make sure you place the meter in various spots around the pot to get an accurate reading.

A great solution to the majority of your watering issues is to use irrigation globes. It’s a small , round globe with an elongated stem that can be put in the soil to act to act as an “automated” watering device.

Although watering globes may last a bit longer than watering your plants manually frequently, you’ll need to monitor the soil’s moisture levels prior to refilling the globes. Based on the length of time that watering globes last the watering schedule will alter in line with the duration of the globe.

To check the soil’s levels of moisture, you can also dip your fingers into the soil. If the top 2 inches of soil are dry, proceed to give the plant enough water.

If you notice areas of water on the tray below or the topsoil, you should throw the water away as it could eventually lead to root rot.

Red Emerald Philodendron Light Requirement

Like most Philodendron plant species like yours, your Red Emerald will need tons of indirect light. The hue of your plant could start to fade if the plant isn’t getting enough sunlight.

Move your plant closer to an opening and make sure it gets between five and 8 hours of indirect and bright sunlight.

Being one of those indoor plant species that requires only a little sunlight or shade, the plant isn’t a good choice in bright sunlight. The leaves can start to burn or appear dull instead of the glossy and leathery appearance we like to get from Philodendrons.

In winter it is possible to observe your plants looking less appealing. It could be due to the absence of sunlight. The options for resolving the issue are two-fold.

You could relocate the plant to an area that gets more sunlight during the winter seasons. This is an simple solution.

If your house is more sombre in the winter months, you can invest in the use of a growing light. Make sure you read the directions and be aware of how powerful the light is in order to avoid burning and to provide the best light exposure.

A full spectrum light could be more effective using an evergreen light like this one. However, white light is able to perform just as well.

Red Emerald Philodendron Temperature

The Philodendron Red is a fan of moderate to high temperatures. The temperature can vary between 55 and 65 degrees. The plant may become sagging at lower temperatures and appear a bit unsightly.

When your plants are subjected to high temperatures, it could develop the disease chlorosis (yellowing leaf).

It is easy to measure the temperature of your plants using a thermometer or the humidity gauge.

Red Emerald Philodendron Humidity

The red Philodendron humidity, as well as the temperature, play an crucially in the way your plant performs. It should have a humidity anywhere at or above 60 percent.

If you have the right humidity you can expect bright and vibrant leaves. Low levels of humidity can lead to dry leaves and slow growth.

If you discover that your home has less than 60 percent humidity, you can easily improve this by installing a diffuser or humidifier to the space.

Another alternative is to create pebbles, using pebbles placed at the base of the plant, which regularly is filled with water. This can add water to the air, and boost the humidity.

Red Emerald Philodendron Fertilizer

To ensure that plant owners get the best Blushing Philodendron maintenance fertilizer is the best method to ensure happy and healthy Red Emerald plants. It is recommended to add fertilizer to your plants every couple of weeks.

A liquid fertilizer is a good choice as it is easy to incorporate into the soil, and the roots of the plant absorb all essential nutrients and minerals much faster.

To slow down the release of toxins, granular fertilizers or powders can be used. Make sure you choose an organic fertilizer that is richer in potassium and nitrogen.

Red Emerald Philodendron Repotting

Do not plant your plants right away after returning it to your home. Let the plant adjust to its new surroundings and surroundings. This will help you deal with any problems may occur in your plant.

If you are satisfied that your plant is flourishing in its new home and you feel that the Emerald Red Philodendron outgrown the pot in which it is currently You may want to consider repotting the plant in a pot that is larger than the size of the one you have.

What do you require:

  • A pot that is clean and larger than the size of the pot.
  • A new type of soil
  • Watering can
  • Gardening trowel

What you must do:

  • The pot should be squeezed around the edges to release the soil away from the sides.
  • Take the plant from the bottom (where the soil is finished and the visible plant starts)
  • Turn the plant upside down and let it fall.
  • Add some soil to the new pot.
  • Make sure the roots are loose (do not let them loosen too much or cause interference with the ball of roots too excessively)
  • Put the plants in the new pot and then fill it with soil to the edges.
  • Then press it down with a firm force and refill it till the root is completely covered.
  • The water will drain at the bottom.

Make sure to not plant again during the primary growth season. Repotting is best done in the shoulder seasons, such as autumn and at the start of spring.

When you’re repotting, make sure to ensure that you don’t disrupt the root ball too often, since this could result in the plants to shock.

If you’re worried about transplant shock, you can include Epsom salts in the water to help strengthen the plant. Magnesium is a great mineral for plants since it assists in photosynthesis and chlorophyll production.

Red Emerald Philodendron Pruning

Pruning is essential for ensuring that the plant can give energy to the new development and healthy leaves. Pruning is essential to trim any dead stems and leaves from your plant at the base. It is also possible to trim any leaves that are unruly and try to reproduce the leaves.

Make sure you use sharp, sterilized shears to remove the plant matter. If you’re pruning session in a mass, make certain to clean the blades in between plants. Inattention could transmit bugs or bacteria between plants. the next.

Prune the stems at the base to prevent dead areas from forming. It is recommended to trim your plants prior to and following the most intense growth sessions (usually during summer, in the summer months when weather conditions are naturally sufficient).

Should I Prune Aerial Roots?

You should not cut off the aerial roots. This can only cause the plant to grow back a little. It is recommended to redirect any the roots that are not needed to the soil, as this could aid in strengthening the plant.

It is possible to train insurmountable aerial roots to climb the moss pole, tree or any other buttresses.

How to Propagate Red Emerald Philodendron

It is easy to propagate the plant by cuttings to produce more red emeralds. After you’ve cut your plant and found some healthy nodes to plant There are several methods to guarantee an optimum young Red Emerald.

  1. Root cuttings that are placed in water The process is the most simple option because you’ll be able observe your plant develop and grow. Choose a healthy node and put the cutting in water. Make sure you change the water frequently and only allow the tip at the bottom to sit within the pool. If the entire stem and leaf are covered, the cutting may rot instead of root.
  1. Root cuttings that are in soil: This method is more precise, however there’s no way to know how the cutting is performing. Put a healthy cut in the soil, then water it a bit, then place it in a dim area. This will let the plant root and grow. Make sure to not play with the cutting frequently, since you could cause damage to new growth.
  1. Nodes that are air-layered on plants that are mother-plants: This technique is a bit more sophisticated, but offers a lot of potential. Cover a node with sphagnum moss. Then mist the moss , and then cover it with plastic wrap to increase the humidity. This will enable roots to develop while in the plant’s mother. When you’ve observed a lot of growth of roots, you’ll be able to remove the node and put it in fertile soil.

Common Problems With Red Emerald Philodendron

It is believed that the Red Emerald Philodendron won’t have any issues if it is properly taken care of. However, it is susceptible to mosaic viruses and mealybugs, as well as scales as well as spider mites.

They are all easy to diagnose and are even more manageable. Continue reading to find out more about problems you might encounter when caring for this gorgeous plant.

Yellow or Brown Leaves and Leaf Spots

Leaves can be quite informative for the majority of plants. Brown or yellow leaves could be a sign of a problem in the health of your Philodendron Red Emerald and are typically the first sign of any serious issues.

Chlorosis (yellowing) of lower leaves is a sign of low temperatures. Anything lower than 40 degrees Fahrenheit will cause the lower part of the plant to turn become yellow. If you’ve noticed that leaves are turning yellow across the entire plant, and that leaves have shrunk in size it’s likely that you have an issue with nitrogen.

Choose a nitrogen-rich and potassium fertilizer to fix this problem.

Dead spots near the leaf’s base are the result of excessive pesticide chemicals (which can be avoided with organic pesticides) and maybe a little of fertilizer in the form of liquid that has been deposited on leaves and dried out.

Make sure you fertilize your garden directly to ensure greater absorption.

If you’re seeing brown edges, it’s likely that your plant isn’t in a good position and could require moving to a location to a location where the light levels are improved and the plant may be subject to lower temperatures. Dead spots that are irregularly appearing on the leaves could result from inconsistent watering or too much light.

Not Enough Sunlight

Although the Philodendron Red Emerald does not like excessive direct sunlight The plant requires plenty of indirect light to create the stunning red color, which is why it gets its name. Insufficient sunlight can lead to dry leaves and less color, and a sagging appearance.

Leggy plants typically have taller stems and longer petioles which makes the plant appear more bare as well as less bushy.

To solve this issue All you need to do is put it in the correct place with enough lighting. If you’re not getting sufficient light inside your home The best solution is to put plants with grow lights.

Grow lights are an excellent method to ensure that your plant gets correct lighting, without removing it away from its place. Make sure you alter the lights to ensure they don’t harm the plant or provide an excessive amount of light because this could cause the edges to become bronzed.

Pests – Mealybugs, Scale, Spider Mites

Pests are commonplace in tropical plants. Philodendron Emerald Red is known to draw a variety of insects including mealybugs, spider mites, and scale.

Scales and mealybugs are tiny white creatures that are evident on any area in your Philodendron Red Emerald. Make sure you check the stems and leaves regularly to look for signs of foreign activity.

These tiny pests can take away the energy that plants require to flourish. If you happen to encounter these pests, there’s an easy solution.

Find a neem oil pesticide, or create a homemade pesticide solution. Spray this on your plant frequently and isolate the plant from other green plants for the best protection.

Spider mites can be a bit more difficult to identify; they typically red and may be difficult to detect on philodendrons with red stems. When the infestation is established it is easy to spot them by the web-like remnants.

If the problem is only concentrated on a single leaf or stem it is possible to remove it and burn the entire piece, including all the insects on it. If you’ve experienced an large problem, making sure you spray them frequently and wiping them clean is the best option to ensure your plants are healthy.

Make sure the spray doesn’t have a strong smell because it could cause burning to the leaves. Mix in a little more water to be sure and then put it in the spray bottle.

Mosaic Virus

Mosaic virus is comparatively rare in the majority of house plants however, Philodendrons are still at risk of contracting the virus. The virus is largely undiscovered and hasn’t been traced out to a large extent (in the case of houseplants).

There is a problem caused due to the mosaic virus when your plant is showing a general look of a flecked appearance. The leaves will start appearing marbling (not with a variety of colors manner), as well as the plants will continue to shrink.

It is impossible for parents of plants to solve this problem since viruses are extremely difficult to eradicate. The most effective way to eliminate this virus would be to completely eliminate the host.

Overwatering and Root Rot

Overwatering could be the most common cause of death for the majority of home plants. This is why there are numerous beautiful innovations like soil meters and watering globes to ensure that we water our plants at just the appropriate timing. A plant that is overwatered can start to lose its shape or wilt, then become brown and eventually die.

Restoring a plant that has been overwatered requires an urgent intervention, particularly when root rot is beginning to grow. If you’re finding the soil around you is always damp (and not dry) or you’re growing ugly looking leaves, it’s likely that you’re overwatering your plants.

Bring the plant outdoors and let it absorb a bit more sunlight than normal (30 minutes is fine) then get it ready to plant it in a new pot. Make sure whether the roots are white strong, solid, and thick and not sluggish and brown. If the roots appear good, you can plant them again using dry soil, and increase the frequency of watering.

If your roots appear rather sad, you can take the plant to the sink and run it under water. Make sure to remove any dead roots and let the plant dry out a bit before placing it in a new pot with fresh soil.

The soil that is overwatered can also contain harmful bacteria and viruses So be sure to alter your soil, and then sterilize your new pot prior to transferring the pot to Philodendron baby.

Frequently Asked Questions About Red Emerald Philodendron

Did we miss something in the previous section? Here are a few of the most frequently asked questions regarding Philo Red Emerald. Philo Red Emerald.

Where Can I Buy a Red Emerald Philodendron?

You can purchase your gorgeous Red Emerald online or at the nearest plant shop. Although it’s not the most rare of all however, this beautiful plant does always appear in the top retail nurseries.

The best option is to look on Amazon or search for cuttings on Etsy.

Is Red Emerald an Indoor Plant?

It is possible to. It could be. Red Emerald Philo can be well appreciated for its indoor use because of its general limitations on light.

The plant is cultivated for indoor use, specifically. It is also possible to put the plant outside, provided that the temperature, humidity and light are consistent all through the all year.

Is Philodendron Red Emerald Variegated?

The majority of Red Emeralds aren’t variegated. However, there are some “designer” Philodendron Red Emerald with variegated leaves.

The tropical climbers can be identified by the red stems and marbled leaves. The green and white leaves contrast with the burgundy-colored branches. This makes an extremely rare and unusual discovery.

Is Philodendron Red Emerald a Climbing Plant?

The Philodendron Red Emerald an self-heading species. It is a plant that is a plant that grows like the tree, and has a long stem, with leaves that are close to one another.

It is a Red Emerald Philodendron can be trained to climb, however, it is also able to stand on its own , or even develop similar to ground cover.

Does Red Emerald Philodendron Climb or Crawl?

Philodendrons’ names are derived from the Greek words meaning “tree lover” as they’re quite accustomed to growing upright in the forest and tying themselves to trees for support when they climb.

The majority of hybrid Philodendrons will do fairly well with minimal support.

In order to replicate the natural environment, the climber will require a moss pole in order to make sure it attains maturity earlier.

How Do I Get My Red Emerald Philodendron to Flower?

The majority of Philodendrons flower when they reach the point of maturity. If you have the right lighting and humidity, temperature as well as a regular watering schedule and fertilizer, you can allow the Red Emerald Philodendron to flower.

Make sure you give the plant to enjoy the ideal conditions to ensure some type of blooming once the plant is in its prime.

Is Red Emerald Philodendron Toxic?

Yes it is true that the Red Emerald Philodendron contains a sap that is irritating and harmful to small animals and humans.

The Philodendron varieties typically contain calcium oxalate crystals which can cause digestive issues.

Is the Red Emerald Philodendron Toxic to Cats?

Like the majority of Philodendrons as well, substances found in the plant may cause irritation to humans and pets if consumed.

Make sure you keep any sap from your pet’s furry companions to avoid any digestive problems like nausea or swelling.

Does Red Emerald Philodendron Need Fertilizing?

Your Red Emerald Philodendron is able to be able to survive without fertilization, but it will prosper more by consuming a healthy and balanced amount of fertiliser.

The addition of fertilizer to your plants will ensure that your plant receives the 13 trace elements needed to make a happy plant.

Is the Red Emerald Philodendron Rare?

Yes it is true that it is true that the Red Emerald Philodendron is relatively uncommon. It’s not as common like it is the White Knight or the Philodendron White Knight since mass production is on the rise in recent years.

Although the plant is more readily available however, it could be slightly more expensive than the majority of local stores may be out of stock quite quickly , as the supply hasn’t yet enough to meet the demand.

Why is My Red Emerald Philodendron Dropping Leaves?

The dropping of leaves is a common occurrence in the world of plants. Old leaves disappear when they’ve served their function to the primary plant. If you’re seeing the new leaves falling it could be a sign of some issues with the plant.

The cause could be the soil’s fluctuating temperatures due to drafts or absence of water.

Why Are the Leaves on My Red Emerald Philodendron Yellow?

The leaves that are yellow can be caused by several reasons. If the leaves in the lower part of the plant are turning yellow it is because the temperatures around the plant aren’t high enough.

If your plant is turning yellow and you’ve noticed fewer leaves it could be a sign of an issue with nitrogen.

Can I Mist My Red Emerald Philodendron?

It is believed that the Red Emerald Philodendron will benefit from the high humidity, just like any other tropical plant. Misting your plant can help to increase the humidity of the surrounding areas, so that the soil and air remain humid and warm.

Can Red Emerald Philodendron Grow in Water?

For rapid growth of your Philodendron quickly You can also remove a few nodes and put the cut nodes in a clean container of water that is clean.

How long will the process take to allow a red Emerald Philodendron to establish roots in the water?

The growth of the root can differ depending on how well-formed the nodes currently are, so make sure to remove a section that has relatively new growth (you’ll be able to tell the growth is new by the deep red hue).

Place the cuttings in an area that is a little less bright so that they have the chance to grow new roots. It could take between 7 to 10 days before you see new roots develop. Be sure that you change your water every so often to replenish the oxygen levels.

Ready to Care for a Red Emerald Philodendron?

Red Emerald Red Emerald plant is a truly stunning feat of beauty. With its long deep dark green stems and rich red leaves, this plant is sure to brighten any collection of green fingers.

Make sure you keep it watered every couple of days and allow the soil to remain moist, and making sure that it is in the proper spot for sunlight, heat, and humidity.

Make sure to fertilize your garden regularly and trim any old leaves to give a more attractive appearance to ensure healthier leaves.

If you’re in search of an ally to keep your healthy and humid plant, you can pair it with the stunning Philodendron Florida Ghost or Alocasia Amazonica to create an array of stunning tropical plants.



Went from a bad gardener to a half-decent one over 10+ years. Super happy to share my tips and tricks with you :)